177. YAESU FT-8100R Dual Band Mobile transceiver 1200 and 9600 baud interface to MFJ-1270CQ Turbo.
178.
YAESU VX-1R "Ultra-Compact" Dual-Band HandHeld transceiver to 5 pin DIN TNC.
179.
YAESU FT-847 HF/VHF/UHF multimode (1200 & 9600 baud) transceiver to the MFJ-1278B MultiMode data controller.
180.
YAESU FT-920, FT-990, FT-1000MP, FT-840, FT-890, FT-747, etc. Transceiver Interface diagram using the 5 pin DIN 'Packet and Data I/O' to TNC
with 5 pin DIN port.
181.
AEA PK-232 MultiMode Controller to the YAESU FT-920 HF transceiver 5 pin DIN DataPort.
182.
Yaesu hand-held radios with the single pin microphone connector similar to the FT-50R and FT-50RD.
Interface; TNC2 and compatibles with 5 pin DIN ports.
183.
For Yaesu hand-held radios with the single pin microphone connector similar to the FT-50R and FT-50RD.
Interface; Kantronics KAM and KAM + VHF port, The KPC-3, KPC-2400, and KPC-9612 1200 baud ports.
184.
Yaesu, Radio Shack, and ICOM hand-held radios with dual (2.5mm and 3.5mm) pin microphone/Ext Spkr connectors.
Interface; TNC2 and compatible 5 pin DIN, TNC connectors. *READ NOTES ON DRAWING.
185.
Yaesu, Radio Shack, and ICOM hand-held radios interfaced to some 5 pin DIN TNC that require inline resistor and capacitor to enable PTT and
MIC I/O. For the HT with two jacks (2.5mm and 3.5mm), microphone/Ext Spkr connectors.
Interface; TNC2 and compatible 5 pin DIN, TNC connectors. *READ NOTES ON DRAWING.
186.
Yaesu, Radio Shack, and ICOM hand-held radios interfaced to the PK-232 and that require inline resistor and capacitor to enable PTT and MIC I/O.
For the HT with two jacks (2.5mm and 3.5mm), microphone/Ext Spkr connectors.
Interface; AEA PK-232 w/5 pin, inline mini connectors.
187.
Yaesu FT-100 and radios with 6 pin, Mini-DIN, 1200 and 9600 baud data port.
Interface; to MFJ-1270C, MFJ-1270CQ Turbo, and MFJ-1278B and other TNC2 clones with 5 pin DIN radio ports
188.
Yaesu, Radio Shack, and ICOM hand-held radios that require an inline resistor and capacitor to enable PTT and MIC I/O.
For the HT with two jacks (2.5mm and 3.5mm), microphone/Ext Spkr connectors.
Interface; KAM/KAM+ (VHF port), KPC-3, KPC-2400, and KPC-9612 1200 baud ports.
189.
Yaesu 3000M, 8000R, 8100R and transceivers that employ the ISO standards, 6 pin, Mini-DIN, 1200 and 9600 baud data port.
Interface; AEA PK-232, 1200 baud data Port 1. *READ NOTES ON DRAWING.
190.
Azden, Kenwood, and Yaesu radios that have the 6 pin, Mini-DIN, 1200 and 9600 baud data port.
Interface; TNC2 and compatible 5 pin DIN, TNC connectors. *READ NOTES ON DRAWING.
191.
Azden, Kenwood, and Yaesu radios that have the 6 pin, Mini-DIN, 1200 and 9600 baud data port.
Interface; Kantronics KPC-9612 9600 baud port.
192.
Yaesu radios that have the 6 pin, Mini-DIN, 1200 and 9600 baud data port.
Interface; KAM/KAM+ (VHF port), KPC-3, KPC-2400, and KPC-9612 1200 baud ports.
193.
Yaesu transceivers with 4 Pin MIC connectors.
Interface; MFJ-1270, 1274, 1278, some PacComs, AEA PK-12, PK-96, PK-900, and DSP-232.
194.
Some Yaesu transceivers with RJ-45 MIC I/O were wired using this connector configuration.
195.
Yaesu radios with 7 pin, Microphone port.
Interface; to KAM/KAM+ (VHF port), KPC-3, KPC-2400, and KPC-9612 1200 baud ports.
NOTE: Receive AF is available at MIC pin 5, and alternate Receive Audio source is from Ext Spkr.
http://ohiopacket.org/files/wiring_diagrams/web.archive.org/web/20000902104029/www.packetradio.org/tnc2rad.htm (13 of 18)11/2/2013 10:33:09 AM
Comentarios a estos manuales